DHCP Full Form | What Does DHCP Stand For?

DHCP: Dynamic Host Configuration Protocol

DHCP Full Form

DHCP full form stands for Dynamic Host Configuration Protocol. Dynamic Host Configuration Protocol (DHCP) is a network management protocol that is used on an Internet Protocol (IP) local area network.

It introduced the concept of a relay agent, which allowed sending BOOTP packets across the network, allowing a central BOOTP server to serve hosts on multiple IP subnets. A DHCP server must exist on the network.

Brief History

  • In 1984, the Reference Address Resolution Protocol (RARP), defined in RFC 903, was introduced to allow simple devices such as diskless workstations to obtain a suitable IP address.
  • However, because it worked at the data link layer, it became difficult to implement on many server platforms, and it was also necessary to have servers on every network link.
  • RARP was developed in September 1985 by the bootstrap protocol (BOOTP) described in RFC 951.

Brief Explanation

A device connected to the network requests an IP address from the DHCP server to the DHCP server. The server identifies the TCP / IP communication identifier, provides the device with a unique address, and other network configuration parameters.

In the absence of a DHCP server, a device that needs an IP address has to manually assign a static address via the network administrator or assign an APIPA address near it (which it must use in its local subnet will not be able to communicate outside).

What Is The Full Form Of DHCP?

DHCP full form stands for Dynamic Host Configuration Protocol. It is a network management protocol that is used on an Internet Protocol (IP) local area network. A device configured to use dynamic (DHCP) addresses that connect to different networks will be assigned an address without the need to reconfigure the network.

Next Topic: POA Full Form

Leave a Comment